Entries by hgb-bearing

Thickness determines the size of the gear

2024-07-16 in /by

The main function of the gear is transmission. Why are some gears large and some gears small? Some people may say it is because of the size of the mold, but not all gear moduli are the ratio of pitch to circumference. The larger the modulus, the stronger and thicker the teeth, and the larger […]

About gear transmission types and fault response methods

2024-06-28 in /by

When manufacturing gears, several typical errors such as eccentricity, pitch error, base pitch error and tooth profile error are usually generated. There are many reasons for gear manufacturers to generate these errors, including errors from machine tool movement, cutting tool errors, errors from improper installation and debugging of tools, workpieces, and machine tool systems, fixture […]

New progress in the manufacturing and application of large-scale mechanical rollers

2024-06-25 in /by

New progress in the manufacturing and application of large-scale mechanical rollers: Safety production and industry exchanges are equally important. Recently, a series of new progress has been made in the field of large-scale mechanical roller manufacturing, which not only improves production efficiency, but also expands the application field, and also puts forward higher requirements for […]

New progress in the manufacturing and application of large-scale mechanical rollers

2024-06-20 in /by

Recently, a series of new progress has been made in the field of large-scale mechanical roller manufacturing, which not only improves production efficiency, but also expands the application field, and also puts forward higher requirements for safe production. In terms of manufacturing, the application of new materials makes the rollers have higher strength and wear […]

Why are most gears forged instead of cast now?

2024-06-13 in /by

In the past, gears were usually made by casting, but now more and more gears are produced by forging. 1. Forging can provide higher strength and toughness. Gears are subjected to huge pressure and load during operation, so their materials must have sufficient strength and durability. In contrast, gears made by casting usually have internal […]

How to extend the service life of rollers

2024-05-28 in /by

As a processing and manufacturing tool, rollers are widely used in factories. Their functions cannot be replaced by other roller products. Of course, the quality requirements for rollers are also very high. After the roller is used for a period of time, various wear problems will occur. In serious cases, the roller may not be […]