Luoyang Hengguan Bearing Technology Co., Ltd.
We want you to be satisfied. Try us!
We want you to be satisfied. Try us!
Luoyang Hengguan Bearing Technology Co., Ltd.
> 丨Room 1917, Block B, Yunfeng International, Jianxi District, Luoyang City, China.
> 丨+8613663793011
> 丨 sales@hgb-bearing.com
> 丨+86-379-60697786
Disassembly method of slewing bearing
/in Company News /by adminBearings, as a kind of mechanical conventional parts, are unavoidable with the use of equipment, so when our equipment or machines are routinely repaired or damaged, we need to disassemble the bearings, especially when the bearings are disassembled for faults, check the parts around the bearings, lubricate them. The situation of the agent and the […]
Explanation of installation method of slewing bearing for large amusement facilities
/in Company News /by adminSlewing ring is a large-scale bearing often used in modern machinery and equipment, which can bear large axial and radial coincidence and overturning moments at the same time. At the same time, it is also an important part of the large-scale amusement facility slewing system, which bears various loads during the operation of the equipment. […]
High speed low noise slewing bearing bearings are shipped
/in Company News /by adminRecently, the high-end slewing bearing for medical CT machine designed and produced by our company for customers has been successfully rolled off the production line, and all the indicators of the finished product have passed the inspection. For the CT machine special slewing bearing, we understand the various technical requirements of the customer, and calculate […]
How long does the turntable bearing grease is filled?
/in Company News /by adminThe turntable bearings are widely used in construction machinery and other equipment platforms. During the use of turntable bearings, the lubrication work is very important that there is no lubrication will greatly reduce the life of the bearing, to ensure that the bearing is effective, reliable, and the bearings must be sufficient. Lubrication, lubrication is […]
Talking about the cold treatment process of bearing steel
/in Company News /by adminThe heat treatment operation of continuously cooling the quenched workpiece from normal temperature to a lower temperature to transform the retained austenite into martensite is called cold treatment. The purpose of cold treatment is to improve the hardness and wear resistance of steel, and stabilize the size of the workpiece. It is mainly used for […]
Which bearings are used in wind turbines?
/in Company News /by adminWind turbines are installed in areas with windy sand or relatively high humidity in the wild. The working conditions of wind turbine bearings are very harsh, and the temperature, humidity, and load that need to be subjected to a wide range of changes. In particular, the yaw and pitch bearings need to withstand large axial […]
Methods and measures to improve bearing fatigue life
/in Company News /by adminBearings are key machine parts that bear load and transmit motion. The challenges brought about by the increasing power density of modern equipment manufacturing industry have put forward higher requirements on the bearing capacity and reliability of bearings. Today, the editor will come to talk with you about methods and measures to improve bearing fatigue […]
Technical Difficulties of Fault Diagnosis for Ladle Turret slewing bearing
/in Company News /by adminThe ladle turntable is one of the important key equipment of the continuous casting machine. Once these key equipment fails, it may cause the entire production line to stop production, disrupt the normal production rhythm, and seriously affect the normal production and economic benefits of the enterprise. In the structure of the ladle turret, the […]
Why do industrial robots need a reducer?
/in Company News /by adminIn recent years, industrial robots have ushered in explosive development, especially due to the increase in labor costs, making manufacturing companies increasingly favor the use of more mechanized, more efficient, and lower-cost robots. When it comes to robots, we have to mention one of the important components, the reducer, which is what we often call […]