Bearings going to Russia are subject to anti-dumping duties that can be settled through re-exports

/分类： /作者：

The Ministry of Industry and Trade of the Russian Federation initiated an anti-dumping investigation on rolling bearing products originating in China. On December 13, 2007, the Russian federal government decided to adopt anti-dumping measures against rolling bearing products originating in China, and implemented a 31.3%-41.5% anti-dumping tax rate, valid for 5 years. On September 18, 2012, the Eurasian Economic Commission launched the first anti-dumping sunset review investigation on the products involved in China.

On September 17, 2013, the Eurasian Economic Commission made an anti-dumping sunset review of the products involved in China, and extended the anti-dumping measures for five years. On September 18, 2017, the Eurasian Economic Commission launched a second anti-dumping sunset review investigation on China’s rolling bearing products. The investigation period of dumping and damage in this case was from July 1, 2016 to June 30, 2017.

Bearing anti-dumping

Such a high anti-dumping duty will bring a heavy blow to China’s bearing export to the Russian market! China’s bearing export enterprises are forced to give up the Russian market! However, we know that Russia’s bearing requirements for China are relatively large. It is a pity that such a large market will give up because of anti-dumping duties!

In order to enable our country’s bearings to export Russian enterprises to continue to maintain the Russian market after anti-dumping, our company has opened up a channel for bearing the third country’s entrepot trade, and entered the Russian market through the third country curve, thus achieving the purpose of avoiding Russian anti-dumping duties.

We know that Russia does not have anti-dumping duties on bearings in all countries, so our solution comes: We first transport the goods to a third country (such as Malaysia, Thailand, etc.). After the goods arrive in a third country, we arrange customs clearance. Change the cabinet, issue a full set of documents from a third country (such as certificate of origin, packing list, INV, bill of lading, etc.), and then re-export to Russia. After the goods arrive in Russia, the customs clearance is a full set of documents from the third country. Such high anti-dumping Tax can be effectively avoided. This is what we call entrepot trade. We have started to operate after obtaining the consent of domestic and foreign customers, especially some foreign BUYER, I really like…

Bearing anti-dumping

The process of re-export operation is as follows:

1) Our company starts to carry goods from any port in China (Tianjin, Qingdao, Shanghai, Ningbo, Shenzhen, Guangzhou Port, etc.), and sends the goods safely to the transit port of the third country. The consignee is designated by our company. Our company is responsible for Re-export port import customs clearance.

2) When the goods are ready to leave the mainland, our company will arrange a two-way schedule according to the needs of the guests, and do BOOKING. After the arrival of the first-way (China-transit port), the container will be put in time and replaced at the terminal. Photographs of changing cabinets will be taken when changing cabinets to ensure the integrity and safety of the goods.

3) After completing the change of the cabinet, take the second-pass (transfer port-destination port) ship, get the bill of lading within 3-5 working days, and make the certificate of origin with the bill of lading. Prior to this, our company will be more correct with the Chinese shipper to do the documents.

4) After all the documents (Bill of Lading, FORM A/CO, INV, Bill of Lading, K2, etc.) are published, we will send the full set of original documents to your company or directly to the destination port. The destination port is used for customs clearance. A full set of documents from the three countries.

I hope that we can win more international markets for more enterprises in China that have encountered trade barriers through this third country re-export!

Personalized development of slewing bearings

/分类： /作者：

With the continuous development of construction machinery, according to the individual needs of users, the construction machinery is oriented towards the individual direction. For example, the excavator has large and medium-sized excavators, and various excavators for improving special purposes. Therefore, the requirements for the personalized development of slewing bearings are put forward. Today, the author mainly talks about the individualized development of slewing bearings.

news

1. Individualized development of different sizes. Due to the inconsistency of various engineering machinery sizes and models, it is also necessary to adapt the size of the slewing bearing.

2. Special-purpose slewing bearings, such as the maximum bearing capacity, with the development of engineering machinery, toward the direction of large-scale development, some engineering machinery has hundreds of tons, so the maximum bearing capacity requirements of slewing bearings continue to increase.

3. Different temperature requirements, the mechanical application environment is now expanding, the total high temperature, high humidity, high salt environment and cold environment, the exhibition center is required to adapt.

4. Low failure rate requirements. With the development of aerospace technology, slewing bearings are required to have ultra-low failure rate characteristics.

In summary, with the development of engineering machinery, new requirements for slewing bearings have been put forward. The development of individualized engineering machinery requires the development of slewing bearings to meet the needs of construction machinery, and also the slewing bearing individualization. The driving force for development and the inevitable development.

Press roll bearing wear repair

/分类： /作者：

The press roll is the main component of the press. There are many types of press rolls. The press section of the old paper machine uses a flat press roll. With the increase of the speed of the paper machine, the vacuum press roll is used, and then the grooved press roll is developed. In the 1970s, the blind hole was researched and developed. Pressure roller and controllable medium and high roller.

After absorbing the advantages of the vacuum press roll, the grooved roll and the blind hole roll, several other new press rolls appeared. In the 1980s and 1990s, wide nip presses and shoe presses for high speed paper machines were developed. Until now, researchers have not stopped developing new press rolls. The purpose of developing new press rolls is to improve dewatering efficiency, improve the quality of the paper sheets, and reduce the adverse effects of the press on the paper industry.

 

Classification of press rolls:

Flat roll press

Both plain and positive presses are pressed with a flat roll. The structure of the flat roll press, the upper roll is a stone roll, the lower roll is a rubber roll, and both rolls have a smooth and smooth roll surface.

Stone rolls are a common flat press roll. Stone rolls are usually made of materials that are easily peeled off from paper, mostly using granite. The main feature of granite is that it has many tiny pores in its structure, which stores a certain amount of air, which is beneficial to the peeling of wet paper sheets. Its disadvantages are high cost and easy brittleness. During operation, if the rotation speed is too fast or the load is too large, the shaft head may be overheated, causing axial or annular cracks on the surface of the stone roller. When the high temperature expansion is serious, the shaft core may fall off.

With the increase in the speed of paper machines, the limitations of granite rolls are becoming more and more obvious. Most of today, artificial stone made of rubber and quartz sand is used instead of natural granite as the upper pressure roller.

The lower roll of the flat roll press is a rubberized cast iron roll. In addition to providing the corrosion resistance of the press roll, it is more important to provide good elasticity, to ease the pressing action of the upper press roll on the wet paper and the felt, thereby prolonging the life of the felt and reducing the “pressing” of the wet paper. The elastic under-sealing roller can also impart good contact and uniform dehydration between the two rolls and compensate for the high error in the lower press roll.

The rubber hardness of the rubber roller when producing general paper is usually 70 to 90 Shore hardness. The hardness of the rubber rollers used in each press of the press section increases as the pressure of each press line increases, and the hardness of the rubber roller also increases accordingly.