Slewing bearing is one of the important parts of many modern machinery and equipment. It is called “joint of machine”. Many people are familiar with various parameters of slewing bearing, including clearance, inner and outer diameter, friction coefficient, etc. Many of my friends don’t know the module of supporting gear, so let’s follow the editor today to understand it.
- what is the slewing ring gear module
The length of the arc (gear)/straight line (rack) occupied by a single gear tooth in the indexing circle (gear)/or line (rack), its length is π * m, and m is the modulus.
What does the module of the slewing ring represent: The module of the slewing ring represents the product of the tooth pitch and the number of teeth of the slewing ring gear, which is the circumference of the index circle. The gear modulus of the slewing ring determines the size of the tooth. The gear modulus is a basic parameter for the calculation of the gear size. The symbol is “m”. Gear cutters can be standardized, so that the standard modulus of gears can be standardized for mass production. Facilitate the replacement of later accessories. In the same way, “modulus” refers to the ratio of the pitch t between the tooth profiles of two adjacent gear teeth on the same side and the circumference ratio π (m=t/π), in millimeters.
If the number of teeth of the slewing ring gear is constant, the larger the gear modulus, the larger the radial dimension of the gear. The teeth of a gear with a large modulus are thick, and for two gears with the same number of teeth, the outer circle of the gear with a large modulus is larger. Therefore, the modulus of the gear in a watch is very small, and the modulus of the flywheel and transmission gear on the mechanical punching machine is large. The modulus of the two meshing gears must be the same. Modulus is the basic parameter of gear design, and it is used in many calculations of gear design.
- Reasonable selection of gear modulus
When designing a gear, one of the important parameters is this modulus. The gnawing of the gear will produce gnawing pulsation. The main reason is that it has a great relationship with the elastic deformation of the gear teeth. It is a basic part of the gear design. Parameter-gear modulus, if it is a relatively large modulus (that is, a gear with a relatively large size), it will also have a relatively large load-bearing capacity. The modulus parameter is inversely proportional to the degree of bending of the gear teeth. The increase of the modulus means that the rigidity of the gear teeth is improved, so that the elastic deformation of the gear teeth will not be great when the gnawing transmission is carried out, which greatly reduces the impact force formed by the gear teeth, thereby achieving The purpose is always greatly reduced. Therefore, from this point of view, the modulus should be increased appropriately, but the error generated when machining gears is also related to the modulus. If the modulus is increased, the tooth profile and pitch will also be increased. At this time, the error of gnawing noise will also increase accordingly, so the choice of modulus should be determined according to the specific situation.
In the case of keeping the modulus unchanged, the diameter of the gear is proportional to the number of teeth, so the change of the number of teeth will also change the bending amount and elastic stiffness of the gear teeth: the strength of the noise generated by the sound source is not only related to the energy of the vibration source It is related to the size of the radiation area. If the radiation area is increased, the radiation power will also increase. Increasing the diameter of the gear will increase the noise radiation area, which will greatly affect the gear. Effective noise control. Therefore, in the relevant design, within the permissible range of ensuring the strength of the gear, the number of teeth and the small modulus should be used as much as possible, and the reasonable selection of materials and heat treatment methods can be combined to promote the improvement of the strength of the gear teeth, thereby Reduce the gear tooth diameter to achieve the purpose of reducing gear noise.
The above is the relevant introduction about the slewing ring gear module. In the slewing ring selection process, the first two sets of data listed in the national standard parameters of the slewing ring module should be selected first, which is more important for the adaptation of the bearing and the replacement of accessories. Convenient, but non-standard gears with customized bearing module requirements for bearings used in special machines are not within the above constraints.