Luoyang Hengchang Heavy Machinery Co.,Ltd.
We want you to be satisfied. Try us!
We want you to be satisfied. Try us!
Luoyang Hengchang Heavy Machinery Co.,Ltd.
> 丨507,Building 4,Zone A National University Science Park , luoyang city Henan province China
> 丨+8613663793011 +8615838553230
> 丨 sophie@hgb-bearing.com
Talking about the cold treatment process of bearing steel
/in Company News /by adminThe heat treatment operation of continuously cooling the quenched workpiece from normal temperature to a lower temperature to transform the retained austenite into martensite is called cold treatment. The purpose of cold treatment is to improve the hardness and wear resistance of steel, and stabilize the size of the workpiece. It is mainly used for […]
What are the requirements for the packaging of bearings?
/in Industry News /by adminFor bearing products, packaging is very important, not only to prevent rust, but also to protect the bearing from bumps during transportation and damage to the bearing. Bearing packaging is divided into inner packaging and outer packaging. So, what are the requirements for the packaging of bearings? First, the inner packaging of the bearing After […]
How to maintain the crane slewing ring?
/in Industry News /by adminThe slewing bearing is an important “joint” of the crane, so its maintenance is very important. So how to maintain the crane slewing ring? When carrying out maintenance work, the first thing to pay attention to is the danger of being dragged into the rotating pinion, as well as the danger of crushing and shearing. […]
Which bearings are used in wind turbines?
/in Company News /by adminWind turbines are installed in areas with windy sand or relatively high humidity in the wild. The working conditions of wind turbine bearings are very harsh, and the temperature, humidity, and load that need to be subjected to a wide range of changes. In particular, the yaw and pitch bearings need to withstand large axial […]
Methods and measures to improve bearing fatigue life
/in Company News /by adminBearings are key machine parts that bear load and transmit motion. The challenges brought about by the increasing power density of modern equipment manufacturing industry have put forward higher requirements on the bearing capacity and reliability of bearings. Today, the editor will come to talk with you about methods and measures to improve bearing fatigue […]
Why the slewing bearing is not installed smoothly or even cannot rotate?
/in Industry News /by adminSometimes the technical indicators were normal when the rotation performance was tested in the factory, but the newly installed slewing bearing and slewing ring showed inflexible rotation. In addition, why the slewing bearing is not installed smoothly or even cannot rotate? Reasons for the unsmooth installation of the slewing bearing 1, mounting hole. The threaded […]
Technical Difficulties of Fault Diagnosis for Ladle Turret slewing bearing
/in Company News /by adminThe ladle turntable is one of the important key equipment of the continuous casting machine. Once these key equipment fails, it may cause the entire production line to stop production, disrupt the normal production rhythm, and seriously affect the normal production and economic benefits of the enterprise. In the structure of the ladle turret, the […]
What is the impact of the amount of grease injected on the bearing?
/in Industry News /by adminWe all know that grease has good adhesion, wear resistance, temperature resistance, rust resistance and lubricity, can improve high temperature oxidation resistance, delay aging, can dissolve carbon deposits, and prevent metal wear debris and oil stains. Poly, to improve the wear resistance, pressure resistance and corrosion resistance of machinery, it will be commonly used in […]
What is the slewing ring gear module?
/in Industry News /by adminSlewing bearing is one of the important parts of many modern machinery and equipment. It is called “joint of machine”. Many people are familiar with various parameters of slewing bearing, including clearance, inner and outer diameter, friction coefficient, etc. Many of my friends don’t know the module of supporting gear, so let’s follow the editor […]